You now have an effective method to enjoy concentration while on the go with these portable gadgets. They also have a stylish appearance, cutting-edge heating technology, and an intuitive UI, so it’s no wonder that their popularity is rising. This article describes how to use Puffco Peak effectively for optimal performance so that you may get the most out of your equipment.

The Shop is pleased to offer the most cutting-edge vapes and accessories, all obtained from reputable manufacturers who adhere to strict quality and safety requirements.

Test run

Let’s do a test to confirm everything is operating as it should.  To activate the Plus, swiftly push the button five times after putting it back together. Double-click to put the heater in session mode, then wait 12 seconds for it to time out. To check whether any hot air will return the favour, try blowing into the heater while it gets heating up. If the air seems warm, you’re ready to travel.

Pour Water Into and Fill the Chamber

Your new Peak has a finely constructed glass attachment that doubles as a water chamber and mouthpiece. To load the cone-shaped glass onto the base, fill it to the fill line at the bottom. If these procedures are unfollowed, the rig may leak water and moisture. You are ready to switch on your Peak or Peak Pro now that it is assembled and has water!

Select a temperature

Four preset temperatures allow for varying experiences with The Peak. Higher temperatures (red and white) are ideal for thick doses, while lower temperatures (blue and green) are excellent for soothing, tasty vapour. We advise novices to begin with the lowest settings.

Put some load on it!

Place your preferred material in rice-grain size on the atomizer’s bottom. Please put it in the centre, away from the walls. Once you press the button twice, your Puffco will heat up. When it reaches operating temperature, it will vibrate and flash three times, taking around twenty seconds. Take a slow breath and enjoy! Double-clicking will add 15 seconds of heating if you continue the session after it expires.

Warm it up

The good times are about to start! This first session will begin with the lowest heat setting and some low-temperature taste. Click four times to go between each temperature level and reach the Blue setting.

Hold down the button to start your hit and activate the heating. When you’re through, let the button drop. It works well for brief, intense impacts. Double-clicking the button will start a 12-second session mode. Take draws until the Plus timer is out for strikes.

Put Some Dab in Your Concentrate

Place the dab tool containing your concentration onto the Puffco Peak’s ceramic bowl and gently press it into place after it has reached the proper temperature. Drag vapour up through the glass attachment and into the water chamber by taking calm, steady breaths through the mouthpiece.

Breathe in and out naturally.

The active components enter your lungs rapidly, so there’s no need to strain or hold in your vapour. Retaining the vapour in your lungs is not essential for a better experience; it will probably only make you cough or have trouble breathing. Inhale and exhale naturally, like you would while sipping liquids with a straw.

Tidy up

Soon, we’ll release a comprehensive cleaning guide, but for now, it’s a good idea to establish a short cleaning regimen. After every session, use a cotton swab to remove any leftover residue. In the long term, this will reduce the need for deep cleanings and help your atomizer last longer.

Conclusion

To begin dabbing, you will need a few ingredients and tools. Fortunately, Puffco offers everything you need to start dabbing, including high-quality rigs, vaporizers, and accessories to enhance the experience. Look at our assortment to take your dabbing to the next level.

Leave a Reply

Your email address will not be published. Required fields are marked *